Posted by McElroy Metal ● Feb 14, 2019 8:00:00 AM

Comparison of Metal Over Metal Roof and Single-Ply Retrofit Roofing Systems

Although metal roofs have a decades-long service life, when they do eventually reach the end of their life building owners must decide to either repair, replace, or retrofit. Retrofitting has a number of advantages, making it a popular solution. However, when building owner's chose to retrofit their existing metal roof, they have a couple of options.

The Metal Building Manufacturers Association (MBMA) published a whitepaper, Comparison of Retrofit System Over Existing Metal Roofs, by Brian Gardiner that dives deep into the options available to building owners. “The goal of this paper is to compare two commonly used methods of retrofitting existing metal roofs and illustrate important design considerations that frequently apply to candidate buildings.”

The two most common retrofit options are metal over metal and single-ply over metal. Both options allow for the original roof to remain in place, meaning that the building does not experience disruption to operations, and reuses the existing insulation. Because the original roof remains, retrofitting also cuts down on landfill waste and can reduce costs (no labor or disposal costs associated with roof removal). However, not all projects can safely accommodate a single-ply retrofit over an existing metal roof.

metal over metal roofSome of the considerations that must be taken into account when determining which retrofit option is best include the building code requirements and design considerations. For instance, single-ply retrofits can result in ponding water which can have catastrophic consequences.

Ultimately the whitepaper recommends that building owners, “Engage a licensed professional engineer practicing structural engineering with knowledge of metal buildings to evaluate the unbalanced loads and potential water accumulation on a single-ply retrofit roof with respect to structural capacity and drainage provisions.” Also, “the retrofit roof designer should verify the fire classification both above and below the retrofit roof system for building code compliance and building insurer acceptance for the retrofit roof system.”

You can read the full Comparison of Retrofit System Over Existing Metal Roofs whitepaper here to learn more about each of these considerations, or you can visit the MBMA website for more info.

New call-to-action

About McElroy Metal

Since 1963, McElroy Metal has served the construction industry with quality products and excellent customer service. The family-owned components manufacturer is headquartered in Bossier City, La., and has 13 manufacturing facilities across the United States. Quality, service and performance have been the cornerstone of McElroy Metal’s business philosophy and have contributed to the success of the company through the years. As a preferred service provider, these values will continue to be at the forefront of McElroy Metal’s model along with a strong focus on the customer. More information can be found at http://www.mcelroymetal.com.

Topics: Recover and Retrofit

Comments